Fourth-Generation Manual Whole-House Water Pre-Filter with 40 μm Filtration Accuracy and Reusable Mesh Filtration
Product Overview
The Fourth-Generation Manual Whole-House Water Pre-Filter is designed for installation at the main water inlet of residential water systems. It helps intercept visible sediment, rust particles and suspended matter before water reaches household plumbing, faucets, water heaters and other downstream equipment.
Its manual rotational drainage structure combines forward flushing, a siphon backwash path and dual-side scraping design to support routine cleaning of the reusable filter mesh. This product is intended for municipal water pre-filtration and is not a replacement for RO purification, disinfection or water softening equipment.
Product Specifications
| Specification |
Value |
| Product Name |
Fourth-Generation Manual Whole-House Water Pre-Filter |
| Product Type |
Reusable mesh sediment pre-filter |
| Water Source |
Municipal water |
| Filtration Accuracy |
40 μm |
| Example Flow Rate |
Up to 4 m³/h |
| Example Operating Pressure |
0.1–0.4 MPa |
| Ambient Temperature |
5–40°C |
| Connection Options |
3/4 in or 1 in |
| Flushing Method |
Manual rotational flushing |
| Cleaning Design |
Forward flush, siphon backwash and dual-side scraping path |
| Installation Location |
Main incoming water line |
| Maintenance |
Flush according to visible sediment and local water quality |
Working Principle
Water passes through the reusable filter mesh, where visible particles such as sand, rust and suspended sediment are intercepted. During maintenance, the user operates the manual drainage control to activate the flushing path.
The fourth-generation structure is designed to combine forward flushing, siphon-assisted backwashing and dual-side scraping action. This helps release accumulated particles from the mesh surface and discharge them through the drain outlet.
Key Advantages
- Reusable mesh filtration for routine whole-house sediment pre-treatment.
- Manual rotational flushing design supports practical maintenance without frequent filter replacement.
- Combined forward flush and siphon backwash path helps clean the filter surface.
- Dual-side scraping structure is designed to reduce mesh fouling during flushing.
- Suitable for installation before household plumbing, faucets and water-using appliances.
- Connection options support common 3/4 in and 1 in plumbing applications.
- Compact pre-filtration solution for distributors, installers and private-label projects.
Applications
- House main water inlet
- Apartment and villa water supply
- Kitchen and bathroom plumbing protection
- Water heater and boiler inlet pre-treatment
- Faucet, shower and appliance water line protection
- Municipal-water residential projects
Why Choose BriskSpring
BriskSpring provides water-treatment product solutions for OEM, distributor and project customers. We support configuration review, connector selection, private-label packaging and product documentation coordination based on the confirmed model and destination market.
FAQ
Does this product soften hard water?
No. This is a sediment pre-filter designed for visible particles. For scale-control requirements, it can be paired with a suitable whole-house physical scale-control product.
Does it remove bacteria, dissolved salts or heavy metals?
No such performance should be assumed. The product is designed for physical interception of visible sediment and suspended particles in municipal water.
How often should the filter be flushed?
The flushing interval depends on water quality, sediment level and actual usage. Flush the unit when visible buildup or reduced water flow is observed.
Can it be installed outdoors?
Installation conditions should protect the product from freezing, direct sunlight and unsuitable environmental exposure. Please follow the installation manual for the confirmed version.
Your message must be between 20-3,000 characters!
English
