HZ-A Horizontal Whole-House Water Pre-Filter with 40 μm Filtration and Manual Flushing

Product Introduction

The HZ-A Horizontal Whole-House Water Pre-Filter is designed for installation at the main water inlet of municipal-water residential systems. It helps physically intercept visible sediment, rust particles and suspended matter before water reaches household plumbing, faucets, showers, water heaters and other downstream equipment.

Its horizontal form is suitable for installations where vertical space is limited. The product uses a 40 μm filtration structure and supports manual flushing for routine maintenance.

This product is designed for sediment pre-filtration only. It is not an RO system, water softener, sterilizer or dissolved-contaminant treatment device.

Product Specifications

Working Principle

Water enters the pre-filter through the inlet connection and passes through the internal filtration structure. Visible particles such as sediment, rust and suspended matter are physically retained before the water continues to the downstream household plumbing system.

During maintenance, the manual flushing function helps discharge retained particles. The product should be installed according to the indicated water-flow direction and with a suitable drainage point.

Key Advantages

• Horizontal structure suitable for compact installation spaces.

• 40 μm filtration for visible sediment pre-treatment.

• Rated flow of 7 t/h for household water applications.

• Manual flushing supports routine maintenance.

• Helps protect downstream plumbing and water-using equipment from visible particles.

• Designed for municipal tap water systems.

• Suitable for distributor, installer and private-label projects.

Applications

• Main water inlet of houses and apartments

• Villa water supply systems

• Kitchen and bathroom plumbing pre-treatment

• Water heater and boiler inlet protection

• Faucet, shower and household appliance water lines

• Residential renovation and plumbing projects

Why Choose BriskSpring

BriskSpring provides water-treatment product solutions for distributors, brand owners, installers and project buyers. We support OEM branding, packaging customization and product configuration review for confirmed projects.

FAQ

Does HZ-A soften hard water?
No. HZ-A is a sediment pre-filter and is not an ion-exchange water softener.

Does it remove bacteria, dissolved salts or heavy metals?
No. HZ-A is designed for physical interception of visible sediment, rust and suspended particles.

How often should it be flushed?
The flushing interval depends on local water quality and usage. Routine flushing is recommended, with adjustment according to visible sediment accumulation.

Can HZ-A be installed in any direction?
Follow the water-flow direction marked on the product and ensure that a suitable drainage point is available.