HZ-B Horizontal Whole-House Water Pre-Filter with 40 μm Filtration Accuracy, Manual Flushing, and 7 t/h Rated Flow
Product Introduction
The HZ-B Horizontal Whole-House Water Pre-Filter is designed for municipal-water systems at the main household water inlet. It helps physically intercept visible sediment, rust particles and suspended matter before water enters downstream plumbing, faucets, showers, water heaters and household appliances.
HZ-B combines a compact horizontal housing with a visible internal filtration section and manual flushing function. It is suitable for routine whole-house sediment pre-filtration in residential plumbing systems.
This product is intended for sediment pre-filtration. It is not an RO system, water softener, sterilizer or dissolved-contaminant treatment device.
Product Specifications
| Specification |
Value |
| Model |
HZ-B |
| Product Type |
Horizontal Whole-House Water Pre-Filter |
| Applicable Water |
Municipal Tap Water |
| Filtration Accuracy |
40 μm |
| Rated Flow |
7 t/h |
| Working Pressure |
0.1–0.7 MPa |
| Applicable Water Temperature |
5–38°C |
| Ambient Temperature |
5–40°C |
| Connector Type |
Male Threaded Connector |
| Product Dimensions |
162 * 105 * 82 mm |
| Flushing Method |
Manual Flushing |
Working Principle
Water flows through the HZ-B internal filtration structure, where visible sediment, rust particles and suspended matter are physically retained. The filtered water then continues to the household water system.
For routine maintenance, the manual flushing function helps discharge accumulated particles. Install the unit in accordance with the product water-flow direction and ensure access to a suitable drainage point.
Key Advantages
-
Compact horizontal design for whole-house pre-filtration.
-
40 μm filtration for visible sediment and rust-particle interception.
-
Rated flow of 7 t/h for household water supply applications.
-
Manual flushing supports routine filter maintenance.
-
Visible filter section supports product inspection.
-
Designed for municipal tap-water systems.
-
Suitable for plumbing distributors, installers and private-label projects.
Applications
-
Main water inlet of houses and apartments
-
Villa water supply systems
-
Kitchen and bathroom plumbing pre-treatment
-
Water heater and boiler inlet protection
-
Faucet, shower and household appliance water lines
-
Residential renovation and plumbing projects
Why Choose BriskSpring
BriskSpring provides water-treatment product solutions for distributors, brand owners, installers and project buyers. We support OEM branding, packaging customization and product configuration review for confirmed projects.
FAQ
Does HZ-B soften hard water?
No. HZ-B is a sediment pre-filter and is not an ion-exchange water softener.
Does it remove bacteria, dissolved salts or heavy metals?
No. HZ-B is designed for physical interception of visible sediment, rust and suspended particles.
How often should it be flushed?
The flushing interval depends on local water quality and usage. Routine flushing is recommended, with adjustment according to visible sediment accumulation.
Where should HZ-B be installed?
HZ-B is designed for installation at the main household water inlet before downstream plumbing and water-using equipment.
Your message must be between 20-3,000 characters!
English
