HZ-D Whole House Sediment Pre-Filter with 40 μm Filtration Precision and 7 t/h Flow Rate in Compact Horizontal Design
Product Overview
The BRISKSPRING HZ-D Whole House Sediment Pre-Filter is designed for municipal tap-water systems at the main water inlet. Its 40 μm filtration precision helps intercept visible sediment, rust and suspended particles before water is distributed through household plumbing.
With a rated flow of 7 t/h, a horizontal in-line structure and 1 inch male connections, HZ-D is suitable for residential water-entry installations that require a compact pre-filtration solution. This product is a sediment pre-filter. It is not an RO system and is not intended to remove dissolved salts, microorganisms or all dissolved contaminants.
Product Specifications
| Specification |
Value |
| Brand |
BRISKSPRING |
| Model |
HZ-D |
| Product Type |
Whole House Water Pre-Filter |
| Applicable Water |
Municipal Tap Water |
| Filtration Precision |
40 μm |
| Flow Rate |
7 t/h |
| Working Pressure |
0.1–0.7 MPa |
| Applicable Water Temperature |
+5°C to +38°C |
| Ambient Temperature |
+5°C to +40°C |
| Connection |
1 Inch Male |
| Installation Type |
Horizontal In-Line Installation |
| Product Dimensions |
162 * 105 * 82 mm |
| Color |
Dark Gray |
Working Principle
Installed on the main water inlet, HZ-D allows municipal water to pass through its internal filtration structure. Visible sediment and suspended particles are retained before the water continues to downstream plumbing fixtures and appliances.
For routine maintenance, flush the unit according to the installation manual and actual source-water conditions. A reliable drainage point should be available at the installation location.
Key Advantages
-
40 μm pre-filtration for visible sediment, rust and suspended particles in municipal tap water.
-
7 t/h rated flow supports typical household water-demand scenarios.
-
Compact horizontal in-line design for installation at the main water inlet.
-
1 inch male connection configuration for compatible plumbing systems.
-
Defined operating range of 0.1–0.7 MPa and +5°C to +38°C water temperature.
-
Flushable design supports routine maintenance without frequent filter replacement.
-
Dark-gray appearance provides a modern option for concealed or utility-area installation.
Application Scenarios
-
Residential main water inlets
-
Apartments and villas supplied by municipal tap water
-
Water-entry protection before bathroom and kitchen plumbing
-
Pre-filtration before selected household water-treatment equipment
-
Installations where visible sediment or rust particles require routine interception
Why Choose BRISKSPRING
BRISKSPRING provides water-treatment product solutions for residential and project applications. For OEM or project requirements, we can evaluate branding, packaging, connection configuration and supporting documentation according to the confirmed product version and destination market.
FAQ
Is HZ-D suitable for well water?
HZ-D is specified for municipal tap water. For well water, high-turbidity water or other special source water, please provide water-quality and flow information for evaluation.
Does this pre-filter replace an RO system or water softener?
No. HZ-D is designed for pre-filtration of visible particles. It does not replace RO purification or ion-exchange water softening.
How often should the unit be flushed?
Flush at least once per month as a general maintenance guideline. Increase the frequency when local water contains more visible sediment.
What thread standard does the 1 inch male connection use?
The product data confirms a 1 inch male connection. Please confirm the exact thread standard required by the local plumbing system before installation or order confirmation.
Can this product be installed outdoors?
Installation conditions should remain within the specified ambient temperature range and should avoid direct exposure to heat sources. Confirm the final installation environment before use.
Your message must be between 20-3,000 characters!
English
